Submissions from 2024
Redesign of Leg Assembly and Implementation of Reinforcement Learning for a Multi-Purpose Rehabilitation Robotic Device (RoboREHAB), Jacob Anthony, Chung-Hyun Goh, Alireza Yazdanshenas, and Yong Tai Wang
Performance of photocatalytic oxidizing air cleaners in different experimental setups – a review, Giovanni Cerrato and Nelson Fumo
Electrospun Ibuprofen-Loaded Blend PCL/PEO Fibers for Topical Drug Delivery Applications, Diala Bani Mustafa, Tsuyoshi Sakai, Osamu Sato, Mitsuo Ikebe, and Shih-Feng Chou
Simultaneous thermal zoning and demand control ventilation, Jose Rodriguez and Nelson Fumo
Submissions from 2023
A Nonlinear Impact-Driven Triboelectric Vibration Energy Harvester for Frequency Up-Conversion, Hadeel Abumarar and Alwathiqbellah Ibrahim
Static and Dynamic Analysis of a Bistable Frequency Up-Converter Piezoelectric Energy Harvester, Mohammad Atmeh, Alwathiqbellah Ibrahim, and Abdallah Ramini
Dynamic thermal model development of direct methanol fuel cell, Mohammad Biswas and Tabbi Wilberforce
Prediction of Transient Hydrogen Flow of Proton Exchange Membrane Electrolyzer Using Artificial Neural Network, Mohammad Biswas, Tabbi Wilberforce, and Mohammad A. Biswas
Design Optimization of the Lift Mechanism in the Robotic Walking Training Device Using the Engineering Design Methodology, Austin Bourgeois, Brian Rice, and Chung-Hyun Goh
Effects of Poloxamers as Excipients on the Physicomechanical Properties, Cellular Biocompatibility, and In Vitro Drug Release of Electrospun Polycaprolactone (PCL) Fibers, Addison Fagile, Rachel Emerine, and Shih-Feng Chou
Fabrication of drug-eluting polycaprolactone and chitosan blend microfibers for topical drug delivery applications, Mulugeta Gizaw, Diala Bani Mustafa, and Shih-Feng Chou
Magnetic Bistability for a Wider Bandwidth in Vibro-Impact Triboelectric Energy Harvesters, Qais Qaseem and Alwathiqbellah Ibrahim
Submissions from 2022
Characterizing the Effect of Adding Boron Nitride Nanotubes on the Mechanical Properties of Electrospun Polymer Nanocomposite Microfibers Mesh, Ohood Alsmairat and Nael Barakat
Incorporation of Torsion Springs in a Knee Exoskeleton for Stance Phase Correction of Crouch Gait, Katy Baker Bumbard, Harold Herrington, Chung-Hyun Goh, and Alwathiqbellah Ibrahim
A review of ductless mini split HVAC system, Manoj Bhandari and Nelson Fumo
Dehumidification performance of a variable speed heat pump and a single speed heat pump with and without dehumidification capabilities in a warm and humid climate, Koukouni P. Kone and Nelson Fumo
A study into Proton Exchange Membrane Fuel Cell power and voltage prediction using Artificial Neural Network, Tabbi Wilberforce and Mohammad Biswas
Power and Voltage Modelling of a Proton-Exchange Membrane Fuel Cell Using Artificial Neural Networks, Tabbi Wilberforce, Mohammad Biswas, and Abdelnasir Omran
Submissions from 2021
Non Uniform Rational B-Splines and Lagrange approximations for time-harmonic acoustic scattering: accuracy and absorbing boundary conditions, S.M. Dsouza, T. Khajah, X. Antoine, S.P.A. Bordas, and S. Natarajan
Using artificial neural network and fuzzy inference system based prediction to improve failure mode and effects analysis: A case study of the busbars production, Saeed Na’amnh, Muath Bani Salim, István Husti, and Miklós Daróczi
Submissions from 2020
Triboelectric energy harvester with large bandwidth under harmonic and random excitations, Alwathiqbellah Ibrahim, Abdallah Ramini, and Shahrzad Towfighian
Submissions from 2019
Thermal and physico-mechanical characterizations of thromboresistant polyurethane films, Aaron C. Wilson, Shih-Feng Chou, Roberto Lozano, Jonathan Y. Chen, and Pierre F. Neuenschwander
Submissions from 2018
Electrospun fibers as a dressing material for drug and biological agent delivery in wound healing applications, Mulugeta Gizaw, Jeffrey Thompson, Addison Faglie, Shih-Yu L Lee, Pierre Neunenschwander, and Shih-Feng Chou
A fuzzy based model for standardized sustainability assessment of photovoltaic cells, Muath Bani Salim, Dervis Emre Demirocak, and Nael Barakat
Nanostructure-enabled and macromolecule-grafted surfaces for biomedical applications, Madeline Small, Addison Faglie, Alexandra J. Craig, Martha Pieper, Vivian E. Fernand Narcisse, Pierre F. Neuenschwander, and Shih-Feng Chou
Submissions from 2017
A review of injectable and implantable biomaterials for treatment and repair of soft tissues in wound healing, Shih-Feng Chou, Simi Gunaseelan, Mhd hussam Hijazi Kiellani, Venkata Vamsi Krishna Thottempudi, Pierre Neuenschwander, and Huarong Nie
In vivo Pharmacological Evaluations of Pilocarpine-Loaded Antioxidant-Functionalized Biodegradable Thermogels in Glaucomatous Rabbits, Shih-Feng Chou, Li-Jyuan Luo, and Jui-Yang Lai
Submissions from 2016
Model and Control Development of Hybrid Fuel Cell and Battery Power System for UAS (Quadcopter), Mohammad Biswas
Development and use of the energy model of a research and demonstration house with advanced design features, Nelson Fumo and Vicente Bortone
Small-Scale and Large-Scale Interventions to Improve [State] Student’s College Readiness, Virgil U. Pierce, Javier A. Kypuros, and Shirley J. Mills
Sensitivity analysis of common input parameters in tools for modeling energy in homes, Sheikh Tijan Tabban and Nelson Fumo
Submissions from 2015
Utilizing an Emporium Course Design to Improve Calculus Readiness of Engineering Students, Virgil U. Pierce and Javier A. Kypuros
Submissions from 2014
Investigating the Potential of Residential District Energy, Nelson Fumo, Vicente Bortone, Juan Zambrano, and Aleyani Zambrano
Submissions from 2013
An Analysis of Sound Exposure in a University Instrumental Music Rehearsal Venue, Joe Farmer, Nelson Fumo, and Michael Thrasher
Submissions from 2012
Metodología para la Aplicación de un Plan de Mantenimiento Centrado en la Confiabilidad con Criterios de Administración de Energía en Equipos de Aire Acondicionado Tipo Compacto, A. Zambrano, J. Zambrano, and Nelson Fumo
Propuesta de implementación de energía solar fotovoltaica en instalaciones pesqueras en Venezuela, Juan Zambrano, Aleyani Zambrano, Buitrago Franklin, and Nelson Fumo
Submissions from 2011
Guided Discovery Modules for Statics and Dynamics, Javier A. Kypuros, Horacio Vazquez, Constantine Tarawneh, and Robert R. Wrinkle
Submissions from 2009
Breaking Away from the Laboratory: Using Lean-Computing Technology to Merge Theory-Based Learning and Experimentation, Thomas Connolly, Kathy Schmidt, and Javier Kypuros
Submissions from 2005
Collaborative Experimentation and Simulation: A Pathway to Improving Student Conceptualization of the Essentials of System Dynamics and Control Theory, Javier A. Kypuros and Thomas J. Connolly